全自動押出中空吹氣成型機 FS-40PDDL-75

首頁 產品系列 全自動押出中空吹氣成型機 全自動押出中空吹氣成型機 FS-40PDDL-75

全自動押出中空吹氣成型機 FS-40PDDL-75

介紹

  • 多層共押出式中空吹氣成型機,以單模架或雙模架機型,搭配單模頭至多模頭之多層共押出模頭設計;適合吹塑由二層至六層之塑膠容器,例如農藥瓶、蕃茄醬瓶和化妝品瓶等。多層共押出技術採用鍑鑫特殊設計之模頭,讓不同屬性之塑料結合。
  • 特性
  • 規格表
  • 更多
  • 機械型號索引系列
  • 雙層/單模頭/單模架 & 雙色/單頭單模架
  • 單模頭單模架加視窗 & 雙模頭單模架加視窗
  • PC/PVC/PTEG
  • 照片
  • 特性
  • 多層共押出式中空吹氣成型機,以單模架或雙模架機型,搭配單模頭至多模頭之多層共押出模頭設計;適合吹塑由二層至六層之塑膠容器,例如農藥瓶、蕃茄醬瓶和化妝品瓶等。多層共押出技術採用鍑鑫特殊設計之模頭,讓不同屬性之塑料結合。
  • 共押出技術可結合不同的塑料,如外層為亮面層,內層為阻隔層,並以接合層將內外結合以達到所需之塑料特性及成效。
  • 多層共押出應用為鍑鑫引領之先進技術。
型號 FS-40 PSSD FS-45 PSSD FS-55 PSSD FS-65 PSSD
樣式 雙層 / 單模頭 / 單模架
使用塑料 PE PE PE PE
螺桿直徑(m/m) 40/25 45/25 55/25 65/25
螺桿比例(L/D) 24/1 24/1 24/1 24/1
*規格若有變動,恕不另行通知
  • Suitable for making plastic products from 5ml up to 500L. Full Shine provides various machineries for best choices, such as A, O, H, P, I, and L Series Blow Molding Machines.
  • Die Head is torpedo design with special flow channel for swift and complete mergence of plastic material inside and to provide better plasticized feature.
  • Various Die Heads from single, double, three, up to eight die heads for the better choice. Parison extrusion speed can be separately controlled by throttles.
  • Die Mouth Extrusion Adjustment by 3-point adjustment; simple and safe way for the operator.
  • High-melting Screw design by SACM 645 steel alloy for better mergence of resin. Force-feeding design for the customized screw as an option.
  • Based on specific material, incorporating with high-melting screw design, the machinery can process:
    PE, PP, PVC, PS, PETG, PA, TPR, PC, EVA, and K-resin.
  • Cutting parison by electric-heated Hot Cutter for cutting the parison of different resin. Multi-die head is available by Cold Cutter.
  • Blow Pin is driven by air pressure for neck twist-off design for precise and forced neck flash removal.
  • Blow Pin up/down, left/right, front/back adjustment is done by slide-board unit with the hand wheels for easy and accurate adjustment.
  • Blow Pin Mandrel has the chill-water circulation or to add the air-exhaust feature for forming the bottle neck precisely.
  • Blow Pin Pre-lift design before mold open, which is suitable for removing neck flash and ensure the cutting ring of the mold for long-term use.
  • Blow Pin movement is driven by the solenoid valve for precise micro pre-lift movement to ensure the neck accuracy of small-necked bottles.
  • Central distance of Blow Pins can be adjusted by Full Shine’s special design.
  • Hydraulic System from YUKEN proportional control to provide strong and powerful mechanical movement and hydraulic clamping circuit.
  • The moving areas are with the manual self-lubricated devices to ensure the parts for better durability and wear-proof.
  • Full Shine special-designed Brake system for the Carriage to provide stable movement and swift positioning.
  • Mold Carriage connects to the bottle line-up frame.
  • Extruder Platen with the special design for up/down adjustment to provide the flexible distance between the extruding mouth and the mold. Mold Platen moving system is driven by roller chain for stable performance.
  • Option: Auto Jar Neck Cutting Device, for cutting jar-neck/ wide-neck bottles with flat and smooth neck surface.
  • Option: Parison Wall Thickness Controller, from MOOG/YUKEN, Japan to provide multi-point thickness control to ensure the equal-thickness parison, available for 30, 32, 100, and 400-point control, and with the separate hydraulic system and stainless steel oil tank to provide the stable and high-performance close-loop servo circuit.
  • Option: Top & Bottom Deflashing Device is to remove the overflow around the plastic products automatically. The device is driven by pneumatic and hydraulic system to ensure the complete deflashing performance, and also can add the post-cooling function.
  • Option: Innovative Blowing Unit Left/Right Swift Movement, driven by the hydraulic system for fast and efficient mold-changing.
  • Option: HMI Touch Screen from Japan, to provide all function-and-setting control on the screen, such as mold file saving, error message report, and I/O monitor.
  • Option: Computerized Keypad Screen from Taiwan, to provide all function-and-setting control on the keypad, such as mold file saving, error message report, and I/O monitor.
  • Option: Servo Control System for Machine Operation, from Yuken, Japan or Taiwan, with the close-loop system for accurate machine performance and saving power; furthermore, available for upgrading to fully-electric system.
  • Customized designs of blow molding machines are available to meet the customer’s special request.
  • Innovative design and user-friendly machine to provide fast mold-changing, material-changing, and color-changing to satisfy the customer’s request: on-time production.
  • PVC machinery with the special-designed screw, the barrel ventilator and air-exhaust design to ensure stable heating performance and to prevent the over-burned PVC issue.
 
機械型號索引系列
  螺桿直徑(M/M) 機械類別 模頭 模架 產品型式
FS- 40 (H) 平移式開關模採用線性滑桿 (S) 單模頭 (S) 單模架 (O) 一般
45 (P) 平行式移模 (D) 雙模頭 (D) 雙模架 (C) 雙色
55 (O) 標準型 / 斜移式 (T) 三模頭   (D) 雙層
65 (A) 空壓式 (F) 四模頭   (T) 三層
75 (L) 前向取出機型 (E) 八模頭   (F) 四層
80 (I) 側向取出機型     (L) 六層
90       (V) 視窗
100       (P) PC奶瓶
範例
FS- 65 P D S D
型號 FS-40 PSSD FS-45 PSSD FS-55 PSSD FS-65 PSSD FS-75 PSSD FS-55 PSSC FS-65 PSSC FS-75 PSSC
樣式   雙層/單模頭/單模架 雙色/單頭單模架
1 使用塑料   PE PE PE PE PE PE PE PE
2 螺桿直徑 m/m 40/25 45/25 55/25 65/25 75/25 55/55 65/65 75/75
3 螺桿比例 L/D 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1
4 螺桿轉速 r.p.m. 20-66 15-61 15-60 15-60 15-58 15-60 15-60 15-58
5 變頻馬達 HP 5/2 7.5/2 10/2 15/2 25/2 10/10 15/15 25/25
6 幫浦驅動馬力 HP 5 7.5 10 10 15 10 10 15
7 空氣壓縮機搭配馬力 HP 5 5 7.5 7.5 10 7.5 7.5 10
8 空氣壓力 Kg/cm2 4-6 4-6 5-7 5-7 5-7 5-7 5-7 5-7
9 鎖模壓力 Ton 2.8 3.9 4.4 6.9 10 4.4 6.9 10
10 油箱容量 Gallon 38 55 60 80 120 60 80 120
11 加熱點數 ZONE 6 6 6 7 7 6 6 7
12 加熱容量 KW 9.5 12 15 19.5 22 19 24.5 26
13 總電力 KW 19 25 32 40.5 44 43 56 77
14 押出量 Kg/hr 15 24 42 55 75 42 55 75
15 每小時空循環 time/hr 1285 1030 880 720 650 880 720 600
16 產品容量 c.c./L 15-500 60-1000 150-2500 1L-5L 1L-10L 150-2500 1L-5L 1L-10L
17 產品重量 g. 5-40 10-100 20-170 40-280 80-500 20-170 40-280 80-500
18 產品最大最小直徑 m/m 10-75 20-100 30-140 50-200 80-260 30-140 50-200 80-260
19 模嘴外徑 m/m 50 56 80 150 200 80 150 200
20 模中心距離 m/m * * * * * * * *
21 開閉模極限 m/m 50-320 50-410 140-540 160-670 50-410 140-540 160-670 160-670
22 容模長度 m/m 146-266 155-290 160-380 223-426 155-290 160-380 223-426 240-460
23 容模寬度 m/m 300 320 360 430 320 360 430 430
24 機器淨重 Kg 3300 3800 4700 7600 3800 4700 7600 7300
25 機器尺寸 m 2.6*1.85*2.7 3*1.9*2.8 3.1*2*2.8 3.6*1.6*3.1 4.2*1.7*3.2 3.1*2*2.8 3.6*1.6*3.1 4.2*1.7*3.2
型號 FS-45 PSSV FS-55 PSSV FS-65 PSSV FS-75 PSSV FS-90 PSSV FS-45 PDSV FS-55 PDSV FS-65 PDSV FS-75 PDSV FS-90 PDSV
樣式   單模頭單模架加視窗 雙模頭單模架加視窗
1 使用塑料   PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP
2 螺桿直徑 m/m 45/25 55/25 65/25 75/25 90/25 45/25 55/25 65/25 75/25 90/25
3 螺桿比例 L/D 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1
4 螺桿轉速 r.p.m. 15-61/5-25 15-60/5-25 15-60/5-25 15-58/5-25 15-56/5/25 15-61/5-25 15-60/5-25 15-60/5-25 15-58/5-25 15-58/5-25
5 變頻馬達 HP 7.5/2 10/2 15/2 25/2 40/2 7.5/2 10/2 15/2 25/2 40/2
6 幫浦驅動馬力 HP 7.5 10 10 15 15 7.5 10 10 15 15
7 空氣壓縮機搭配馬力 HP 5 7.5 7.5 10 15 5 7.5 7.5 10 15
8 空氣壓力 Kg/cm2 4-6 4-6 5-7 5-7 5-7 4-6 5-7 5-7 5-7 6-8
9 鎖模壓力 Ton 3.9 4.4 6.9 9.5 13 3.9 4.4 6.9 9.5 13
10 油箱容量 Gallon 55 60 80 120 250 55 60 80 120 250
11 加熱點數 ZONE 6 6 7 7 9 8 10 10 10 12
12 加熱容量 KW 11.5 14.5 18.8 23 29.5 14.5 18.8 20.3 25 36
13 總電力 KW 24.5 31.5 40.5 54.5 72.5 27.5 36.5 43 57 80
14 押出量 Kg/hr 30 42 61 81 106 30 42 61 81 106
15 每小時空循環 time/hr 1030 880 720 650 650 1030 800 720 650 650
16 產品容量 c.c./L 60-1000 150-2500 500-5000 1L-10L 10L-20L 40-500 100-1250 280-1800 0.5L-2.5L 1L-5L
17 產品重量 g. 10-100 20-170 40-280 80-500 120-370 5-40 10-100 20-170 40-170 80-280
18 產品最大最小直徑 m/m 20-100 30-140 50-200 80-260 150-340 20-70 30-85 40-100 40-130 100-160
19 模嘴外徑 m/m 56 80 150 200 280 42 50 65 80 150
20 模中心距離 m/m * * * * * 100 120 140 160 200
21 開閉模極限 m/m 50-320 50-410 140-540 160-670 160-670 50-320 50-140 140-540 160-670 160-670
22 容模長度 m/m 146-266 155-290 160-380 223-426 288-556 146-266 155-290 160-380 223-426 288-556
23 容模寬度 m/m 300 320 360 430 520 300 320 360 430 520
24 機器淨重 Kg 3600 3800 4700 7600 8600 3700 3900 4800 7700 8700
25 機器尺寸 m 3*1.4*2.9 3*1.5*2.9 3.6*1.6*3.2 4.2*1.7*3.3 5.2*1.9*4.1 3*1.6*2.9 3*1.7*2.9 3.6*1.6*3.2 4.2*1.7*3.3 5.2*1.9*4.1
型號 FS-45 PSSP FS-55 PSSP FS-65 PSSP FS-40 PSSO FS-45 PSSO FS-55 PSSO FS-65 PSSO FS-40 PDSO FS-45 PDSO FS-55 PDSO FS-65 PDSO FS-40 PSSO FS-45 PSSO FS-55 PSSO
樣式    Single Die-head/Single Station  Single Die-head/Single Station Double Die-head/Single Station Single Die-head/Single Station
1 使用塑料   PC PC PC PVC PVC PVC PVC PVC PVC PVC PVC PETG PETG PETG
2 螺桿直徑 m/m 45 55 65 40 45 55 65 40 45 55 65 40 45 55
3 螺桿比例 L/D 26/1 26/1 26/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 26/1 26/1 26/1
4 螺桿轉速 r.p.m. 20-61 20-60 20-58 20-66 20-61 20-60 20-58 20-66 20-61 20-60 20-58 20-66 20-61 20-60
5 變頻馬達 HP 10 15 20 7.5 10 15 20 7.5 10 15 20 7.5 10 15
6 幫浦驅動馬力 HP 7.5 10 10 5 7.5 10 10 5 7.5 10 10 5 7.5 10
7 空氣壓縮機搭配馬力 HP 7.5 7.5 10 7.5 7.5 7.5 10 7.5 7.5 7.5 10 7.5 7.5 7.5
8 空氣壓力 Kg/cm2 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7
9 鎖模壓力 Ton 3.9 4.4 6.9 2.8 3.9 4.4 6.9 2.8 3.9 4.4 6.9 2.8 3.9 4.4
10 油箱容量 Gallon 55 60 80 38 55 60 80 38 55 60 80 38 55 60
11 加熱點數 ZONE 4 4 5 4 4 4 5 6 6 7 8 4 4 4
12 加熱容量 KW 9.5 12.5 16.8 7 9.5 12.5 16.8 7.5 10.25 13.6 17.5 7.5 9.5 12.5
13 總電力 KW 23 32 40 15 23 32 40 17 23.5 33 41 17.5 23 32
14 押出量 Kg/hr 24 36 55 15 24 36 55 15 24 36 55 19 24 36
15 每小時空循環 time/hr 1030 880 720 1285 1030 880 720 1285 1030 880 720 1285 1030 880
16 產品容量 c.c./L 200-900 300-1800 1L-4L 15-400 200-1000 500-2000 1L-4L 15-200 60-400 200-900 500-1500 15-200 200-900 500-1800
17 產品重量 g. 10-65 20-170 40-200 5-40 10-65 20-170 40-200 4-25 5-30 10-50 25-110 5-40 10-65 20-110
18 產品最大最小直徑 m/m 20-90 30-120 50-200 10-75 10-100 30-140 50-200 10-65 20-70 30-85 40-95 10-65 10-90 30-120
19 模嘴外徑 m/m 60 80 120 50 60 80 120 38 40 50 65 50 60 80
20 模中心距離 m/m * * * * * * * 85 100 120 140 * * *
21 開閉模極限 m/m 50-320 50-410 140-540 20-230 50-320 50-410 140-540 20-230 50-320 50-410 140-540 20-230 50-320 50-410
22 容模長度 m/m 120-290 140-330 160-340 100-210 120-290 140-330 160-340 100-210 120-290 140-330 160-340 100-210 120-290 140-330
23 容模寬度 m/m 280 306 350 200 280 306 350 200 280 306 350 200 280 306
24 機器淨重 Kg 3000 3500 4400 2500 3000 3500 4400 2500 3200 3700 4600 2500 3000 3500
25 機器尺寸 m 3*1.85 *2.3 3*1.9 *2.45 3.6*2 *2.5 2.3*1.7 *2.2 3*1.85 *2.3 3*1.9 *2.45 3.6*2 *2.5 2.3*1.7 *2.2 3*1.85 *2.3 3*1.9 *2.45 3.6*2 *2.5 2.3*1.7 *2.2 3*1.85 *2.3 3*1.9 *2.45
照片
Sample bottles
照片
Sample bottles
照片
Carriage Movement by Linear Slideway
照片
Special-designed Die Head for 2-layer to 6-layer Co-extrusion
照片
Direct-mounted Gear Box
照片
Extruder, Driven by Inverter Motor